DF560S
Doofor DF560S is a high-frequency hydraulic rock drill specially designed for surface production drilling and general tunnel work. The rotation motor of the DF560S is installed on the top side of the rock drill. The rock drill has a separated flushing box. Flushing media can be water or air. Flushing parts are available in brass or in stainless steel to avoid corrosion caused by saline water.
Optimal maximum hole diameter for the DF560S is 89 mm [3½”].
The rock drill can be equipped with shank adapters (striker bars) R38, T38, and T45.
This rock drill can be equipped with stainless steel, separated flushing head for underground mining, bolting, and grouting.
89 MM
OPTIMAL MAXIMUM HOLE DIAMETER
20 KW
POWER CLASS
R38, T38, T45
SHANK SIZE
AIR/WATER
FLUSHING
| Nominal power class | 20 kW |
| Percussion pressure | 150 bar |
| (Percussion oil-flow) | (110-130 litres/min) |
| Rotation motor* | 160 cm3 |
| Speed max. | 250 rpm |
| Torque* | 975 Nm |
| Oil flow* | 40 litres/min (max 90 litres/min) |
| Gear ratio | 65/40 |
| Lubrication | Air-oil mist, min. 200 g/h |
| Flushing air pressure. | 5-7 bar |
| Flushing air flow | 4000 litres/min |
| Flushing water flow | 150 litres/min |
| Weight | 178 kg |
*) Motor options are 125 cm³, 160 cm³ and 200 cm³. Number given is for standard rotation motor (160 cm³) at an intermittent pressure of 275 bar [3989psi].
**) Number given is for standard rotation motor (160 cm³) at an operating pressure of 175 bar [2466psi].
The product is for professional use only, as a component of a hydraulic system.
Feed force (pressure) must be adjustable during operation. Rotation torque and oil flow values given are for a typical rotation motor. See full brochure for detailed information on different rotation motors. Percussion pressure mentioned is a recommended value for a typical application. The product is intended for professional use by skilled personnel. Doofor reserves all rights for changes without prior notice.
