DF530F
Doofor DF530F is a hydraulic rock drill with a female, threaded shank. The rock drill uses a separate flushing box with side flushing connection. The typical application for a Doofor DF530F rock drill is bolting and other rock enforcing underground and on the surface.
45 MM
OPTIMAL MAXIMUM HOLE DIAMETER
10 KW
POWER CLASS
R28, R32, HEX 7/8″
SHANK SIZE
AIR/WATER
FLUSHING
| Nominal power class | 10 kW |
| Percussion pressure | 100-130 bar |
| (Percussion oil-flow) | (45-55 litres/min) |
| Rotation motor | 32 cm3 |
| Speed | 130-300 rpm |
| Torque (32cm3)* | 175 Nm |
| Oil flow* | 15 litres/min (max 25 litres/min) |
| Gear ratio | 52/17 |
| Lubrication | Air-oil mist, min. 125 g/h |
| Flushing air pressure. | 12 bar |
| Flushing air flow | 1200 litres/min |
| Flushing water pressure | 12 bar |
| Flushing water flow max. | 40 litres/min |
| Weight | 65 kg |
*) Numbers given are for standard rotation motor (32 cm³) with an intermittent pressure of 140 bar [2031psi]. Motor options are 8 cm³, 12.5 cm³, 20 cm³, 32 cm³, 40 cm³. For professional use only as a component of a hydraulic system.
Feed force (pressure) must be adjustable during operation. Rotation torque and oil flow values given are for a typical rotation motor. See full brochure for detailed information on different rotation motors. Percussion pressure mentioned is a recommended value for a typical application. The product is intended for professional use by skilled personnel. Doofor reserves all rights for changes without prior notice.
