Designed to endure
demanding environments


High-performance hydraulic rock drill

Doofor DF560L-EXT is a high-frequency hydraulic rock drill specially designed for underground production drilling and tunneling. The DF560L-EXT has a very low overhead, only 84mm from the drill center line. The rotation motor of the DF560L-EXT can be installed on the right-hand or the left-hand side. The rock drill has a separated flushing box. Flushing media can be water or air. Flushing parts are available in bronze or in plastic to avoid corrosion caused by saline water. EXT-version is for back hammering to break drill strings and for removing stuck drill steels from the rock.

Optimal maximum hole diameter for the DF560L-EXT is 89mm [3 ½”].

The rock drill can be equipped with shank adapters (striker bars) R38, T38, and T45. It can be equipped with stainless steel, separated flushing head for underground mining, bolting, and grouting.

The DF560L-EXT can be equipped with heat resistant sealing for tap hole drilling.

Technical Data
Percussion power 20 kW
Percussion pressure 150 bar
(oil flow) (110-130 litres/min)
Rotation motor*
Speed max. 250 rpm
Torque* 975 Nm
Oil flow max.* 65 litres/min
Gear ratio 65/40
Lubrication Air-oil mist, min. 200 g/h
Flushing air pressure 5–7 bar
Flushing air flow 4000 litres/min
Flushing water flow 150 litres/min
Weight 170 kg

89 mm

Optimal maximum
hole diameter

20 kW

Power class

T38, T45

Shank size



Feed force (pressure) must be adjustable during operation. Rotation torque and oil flow values given are for a typical rotation motor. See full brochure for detailed information on different rotation motors. Percussion pressure mentioned is a recommended value for a typical application. The product is intended for professional use by skilled personnel. Doofor reserves all rights for changes without prior notice.

©2019 Doofor Inc