Hydraulic rock drills and drifters
High-performance hydraulic rock drill
Doofor DF560L is a high-frequency hydraulic rock drill specially designed for underground production drilling and tunneling. The DF560L has a very low overhead, only 84mm from the drill center line. The rotation motor of the DF560L can be installed on the right hand or the left hand side. The rock drill has a separated flushing box. Flushing media can be water or air. Flushing parts are available in bronze or in plastic to avoid corrosion caused by saline water.
Optimal maximum hole diameter for the DF560L is 89mm [3 ½”] at the most.
The rock drill can be equipped with shank adapters (striker bars) R38, T38, and T45.
This rock drill can be equipped with stainless steel, separated flushing head for underground mining, bolting, and grouting.
The DF560L can be equipped with heat resistant sealing for tap hole drilling.
|Percussion power||20 kW|
|Percussion pressure||150 bar|
|(oil flow)||(110-130 litres/min)|
|Rotation motor*||160 cm3|
|Speed max.||250 rpm|
|Oil flow max.*||65 litres/min|
|Lubrication||Air-oil mist, min. 75 g/h|
|Flushing air pressure||5–7 bar|
|Flushing air flow||4000 litres/min|
|Flushing water flow||150 litres/min|
Feed force (pressure) must be adjustable during operation
*) Numbers given are for standard rotation motor (160cm3) at an intermittent pressure of 175bar [2466psi]. Motor options are 80cm³, 100cm³, 125cm³, 160cm³, 200cm³, 250cm³. For professional use only as a component of a hydraulic system.