Designed to endure
demanding environments

Hydraulic rock drills and drifters

DF430X – DF430S – DF430F – DF500X – DF500S – DF530X – DF530SDF538L – DF540L – DF540L-BLT – DF550L – DF550L-2M – DF550L-EXT – DF560L - DF560L-2M – DF560L-EXT


High-performance hydraulic rock drill

Doofor DF430X rock drill is a high-frequency rock drill for general excavations, quarrying and bolting with hexagonal shank steels with a shank size of 108mm [4 ¼”] * 22mm [7/8”] or 25mm [1”]. The rock drill has a female hexagonal chuck.

Doofor DF430X can use water or air as media for drill hole flushing. It has a flushing tube for enhanced flushing power. The rock drill has a patented, high energy piston shape for good penetration speed in hard rock and good drill tool lifetime.

Light piston models DF410X and DF420X are available.

Hydraulic, pneumatic and mechanical steel retainer lock cylinders are available from the manufacturer. Manufacturer can also provide a universal carriage plate for the rock drill.

Doofor DF430X hydraulic rock drill
 Technical Data
 Percussion power  5 kW
 Percussion pressure  120 bar
 (Percussion oil flow)  (45 litres/min)
 Rotation motor*  20,0 cm3
 Rotation speed max.  200–300 rpm
 Torque*  100 Nm
 Oil flow max.*  10–15 litres/min
 Gear ratio  47/17
 Lubrication  Air-oil mist, min. 125 g/h
 Flushing air pressure  5–8 bar
 Flushing air flow  700-1200 litres/min
 Flushing water flow  15–30 litres/min
 Weight  41 kg

Feed force (pressure) must be adjustable during operation.
For efficient lubrication, the lubrication air pressure should always be set 2 bar higher than flushing pressure.
*) Numbers given are for standard rotation motors at an intermittent pressure of 140bar [2031psi]. Motor options are 12.5cm³, 20 cm³, 32cm³, 40cm³. For professional use only as a component of a hydraulic system.


41 mm
Optimal maximum
hole diameter
5 kW
Power class
Shank size

Doofor DF430X in action

DF430X rock drills